Modifoam 735



Modifoam 735 is a special mixture of anionic surfactants

resulting in a high performance drilling foam for hammer and

air rotary drilling. Modifoam 735 can be used in fresh, brackish,

hard or salty water. Modifoam 735 generates stable foams

which can be boosted into a very stiff foam by adding ARGIPOL

F or PAC L. Modifoam 735 is very effective when drilling large

holes in areas where lost circulation is expected.




Drilling Foam for rock drilling, water well drilling, mining,

for simple air drilling and stiff foam drilling by adding polymers.

Properties: Modifoam 735 is a high performance foaming agent in air

drilling applications. The foam is generated at the surface by

mixing the air from the compressor with the liquid Modifoam

735/water solution from the pump.

Ready mixed Modifoam 735 is a drilling foam with high

elasticity and high carrying capacity which improves borehole

stability in poorly consolidated sand and gravel formations.

With Modifoam 735 an extended bit life is achieved. The

compressed air cools the bit and carries the cuttings up very

quickly. Modifoam 735 increases the penetration rate

remarkably, in many cases the drilling procedure is 2 – 3 times

faster resulting in an longer bit life.

Modifoam 735 is a pale yellow liquid. It is completely soluble in

water. Modifoam 735 is environmentally friendly and






For normal drilling: 10 – 15 kg / m³

For stiff foam drilling:

1 – 1,5 kg Argipol L / m³ + 15 kg Modifoam 735 / m³ or

2 – 3 kg PAC R / m³ + 15 kg Modifoam 735 / m³


After injection into the air stream the fluid will create stiff and

stable foam like shaving cream.


Very hard water should be pretreated with soda ash




25 kg plastic jerry cans

200 kg plastic drums

1.000 kg containers